Torque Wrench Adapter


This is a Motion Pro torque wrench adapter. It is used to set the proper torque on the cylinder base nuts of air cooled motors like that of the FL350 Odyssey. It also works for any other motor where the head of the torque wrench will not fit under the cooling fins. Too low of torque on the cylinder base nuts can cause an air leak. Too tight and the cylinder flange will warp also causing an air leak. The air leak can result in engine failure.

Add to Cart:

  • Model: Honda FL350 Odyssey
  • Manufactured by: Motion Pro

Copyright © 2020 Aftershock Motorsports. Powered by Zen Cart