New Products




High Angle 930 CV Boot

Add:
High Angle 930 CV Boot
Model:
Manufacturer: EMPI

Price: $16.95

This style boot clamps on the outside of the CV rather than using the OEM style retainer.

Reduction Case Oil Seal 1-14

Add:
Reduction Case Oil Seal 1-14
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $17.95

Honda FL350R Odyssey Reduction Case Oil Seal for output shaft on left side. Replaces OEM 91223-VM0-004

Needle Bearing for Reverse Idler Gear 2-34

Add:
Needle Bearing for Reverse Idler Gear 2-34
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $24.95

Honda FL350R reduction case needle bearing for reverse idler gear. Replaces OEM 91025-VM0-004.

Needle Bearing for Primary Gear 2-35

... more info
Sold Out
Needle Bearing for Primary Gear 2-35
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $24.95

Honda FL350 R reduction case needle bearing for both primary gears. Replaces Honda OEM 91007-HB3-013.

Right Countershaft Bearing 2-31

Add:
Right Countershaft Bearing 2-31
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $24.95

Honda Odyssey FL350R reduction case bearing for right end of counter shaft. Replaces Honda 91009-HC0-003

Rear Shocks, G-Series

... more info
Rear Shocks, G-Series
Model:
Manufacturer: Works Performance

Price: $699.95

The G-Series shocks add threaded pre-load standard. The have 5/8" shafts vs. 1/2" shafts on the AT Steelers. Heim ends are standard. The ... more info

Heavy Duty Replacement U-Joint

Add:
Heavy Duty Replacement U-Joint
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $189.99

Aftershock Motorsports has until recently maintained the stance that if your U-joints needed replacement, you should replace the entire axle. The OEM ... more info

Studs - Water Cooled Head - Replacement Parts

Add:
Studs - Water Cooled Head - Replacement Parts
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $39.95

7 long studs for mounting the Aftershock Motorsports water cooled head. We have been told these work for the Hillside Honda heads as well, but have ... more info

O-rings for Water Cooled Head Dome

Add:
O-rings for Water Cooled Head Dome
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $9.95

1 Large O-ring and 1 Small O-ring to fit all Aftershock Motorsports replaceable dome FL350 R heads.

O-rings for Water Cooled Head Studs

Add:
O-rings for Water Cooled Head Studs
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $5.95

7 Smaller O-rings that go on the studs above the head gasket on the Aftershock Motorsports FL350 R water cooled head. These are for all heads where ... more info


Copyright © 2017 Aftershock Motorsports. Powered by Zen Cart