All Products





Power Bloc Clutch Puller

... more info
Sold Out
Power Bloc Clutch Puller
Model: Honda Odyssey and Pilot
Manufacturer: Aftershock Motorsports

Price: $49.95

This puller allows removal of a Power Bloc without damage to the clutch or crankshaft.

Piston Circlips - 20mm

Add:
Piston Circlips - 20mm
Model: Honda FL400 Pilot
Manufacturer: Wiseco

Price: $2.49

Pair of circlips for pistons with 20mm wrist pins

Piston Circlip 18mm

Add:
Piston Circlip 18mm
Model: Honda Odyssey
Manufacturer: Wiseco

Price: $2.49

Wrist pin cir-clips for pistons with 18mm wrist pins.

Outboard CV Boot kit

Add:
Outboard CV Boot kit
Model: Honda FL400 Pilot
Manufacturer: Aftershock Motorsports

Price: $18.99

CV boot kit comes with 1 grease pack, 1 cv boot, and 2 cv clamps.

OEM Style Steel Front Wheel

Add:
OEM Style Steel Front Wheel
Model: Honda 350 odyssey and 400 Pilot
Manufacturer: Aftershock Motorsports

Price: $189.95

This steel wheel is the same size as stock, 10x5.5. It's offset within about 1/8" of stock which is good for handling. It is very similar to the ... more info

O-rings for Water Cooled Head Studs

Add:
O-rings for Water Cooled Head Studs
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $5.95

7 Smaller O-rings that go on the studs above the head gasket on the Aftershock Motorsports FL350 R water cooled head. These are for all heads where ... more info

O-rings for Water Cooled Head Dome

Add:
O-rings for Water Cooled Head Dome
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $9.95

1 Large O-ring and 1 Small O-ring to fit all Aftershock Motorsports replaceable dome FL350 R heads.

Nylock lug nuts for aluminum wheels

Add:
Nylock lug nuts for aluminum wheels
Model: Honda 350 Odyssey and 400 Pilot
Manufacturer: Aftershock Motorsports

Price: $18.99

This is a set of 16 NyLock lug nuts for mounting aluminum wheels. These will not back off from vibration.

NGK Spark Plug

... more info
NGK Spark Plug
Model: Odyssey and Pilot
Manufacturer: NGK

Price: $3.75

The BR9ES is the factory installed plug on the FL350. The BR8ES on the FL400. An FL350 with a water cooled head should run a BR8ES.

Needle Bearing for Reverse Idler Gear 2-34

Add:
Needle Bearing for Reverse Idler Gear 2-34
Model: Honda FL350 Odyssey
Manufacturer: Aftershock Motorsports

Price: $24.95

Honda FL350R reduction case needle bearing for reverse idler gear. Replaces OEM 91025-VM0-004.


Copyright © 2017 Aftershock Motorsports. Powered by Zen Cart